MANUFACTURER All Low-Voltage Cables
iTech Cables is manufacturer of all Ethernet Cable Category 5e Category 6 Plenum CMP rated cables, together with Superior quality RJ45 connector, patch cables, keystone jacks, Wall Plates, and other accessories, By providing a five-star administrations to our Cables customers, for custom cables as well as your structured cabling projects you should simply call us or send us an e-mail.
Category 6 cable (Cat 6), is a standardized twisted pair cable for Ethernet and other network physical layers that is backward compatible with the Category 5/5e and Category 3 cable standards. Cat 6 has to meet more stringent specifications for cross talk and system noise than Cat 5 and Cat 5e. The cable standard specifies performance of up to 250 MHz, compared to 100 MHz for Cat 5 and Cat 5e.
Whereas Category 6 cable has a reduced maximum length of 55 meters when used for 10GBASE-T, Category 6A cable (or Augmented Category 6) is characterized to 500 MHz and has improved alien cross talk characteristics, allowing 10GBASE-T to be run for the same 100-meter maximum distance as previous Ethernet variants.
Category 6 and 6A cable must be properly installed and terminated to meet specifications. The cable must not be kinked or bent too tightly; the bend radius should be larger than four times the outer diameter of the cable. The wire pairs must not be untwisted and the outer jacket must not be stripped back more than 1/2" (12.7 mm).
Cable shielding may be required in order to improve a Cat 6 cable's performance in high electromagnetic interference (EMI) environments. This shielding reduces the corrupting effect of the cable's data. Shielding is typically maintained from one cable end to the other using a drain wire that runs through the cable alongside the twisted pairs. The shield's electrical connection to the chassis on each end is made through the jacks.
The requirement for ground connections at both cable ends creates the possibility that a ground loop may result if one of the networked chassis is at different instantaneous electrical potential with respect to its mate. This undesirable situation may compel currents to flow between chassis through the network cable shield, and these currents may, in turn, induce detrimental noise in the signal being carried by the cable.
When used for 10/100/1000BASE-T, the maximum allowed length of a Cat 6 cable is 305 meters (1000ft). This consists of 305 meters (1000ft) of solid "horizontal" cabling between the patch panel and the wall jack, plus 5 meters (16 ft.) of stranded patch cable between each jack and the attached device. For 10GBASE-T, an unshielded Cat 6 cable should not exceed 55 meters and a Cat 6A cable should not exceed 100 meters .
Cat6a Bare Copper 1000ft Plenum CMP Rated UTP Bulk Ethernet Cable is designed to achieve a maximum distance of 100 meters for full 10 Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 cannot. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e.CAT6A Plenum CMP Rated Cable conductors featuring 23 AWG 4 Pairs with unshielded twisted pair (UTP) are Solid Bare Copper, which insures performance with high-speed Gigabit Ethernet.
iTechCables is the perfect fit for reliable installations where the cable will be used indoors. Our Cat6a Plenum Bare Copper is a fire safety rated cable that contains a flame-Retardant Plenum jacket that produces less smoke than traditional Plenum jackets. All of our Plenum UTP Cat6a Bare Copper 1000ft Plenum Bulk Ethernet Cable is available in Blue/White/Grey/Black colors and comes on a tough wooden-spool to make the installation easier.
iTech Cables meet ANSI/TIA/EIA-568B.2, ISO/IEC 11801 standards up to 500 MHz bandwidth capacity tested with enhanced data & voice and security capabilities and is verified by outside standards organizations including ISO/IEC us as well as being RoHS Compliant. It also supports Ethernet 100BASE-TX, 100BASE-VG, and 155 ATM. Particularly-suited for high bandwidth applications such as 622 ATM. Wideband Ethernet 1000BASE-T and emerging applications with anticipated data rates.
650MHz/23AWG/CMP/BC Conductors is best for your indoor voice, data, video, and security networking applications. Some common applications for this kind of cable embody retrofitting; cat6a cable is best for putting in plenum spacing due to its fire-resistive qualities. Whether or not you’re wiring your home, workplace or an entire field, iTech Cables have the most effective network resolution for you. Get the highest qualitative Cat6a plenum rated jacket and conductor is a thousandth solid copper created.
iTech Cables offer the highest quality Cat6A plenum 4-pair solid conductor terribly low smoke RoHS criticism jacket for indoor local area network networking applications. Cat6A TIA/EIA certified. iTech Cables Cat6A protected CMP Rated Plenum Cable is intended for residential/commercial local area network applications and is proof against hearth and warmth, creating it the most effective resolution for installation runs that need plenum rated.
Cat6a Plenum Bare Copper local area network cables are eight conductors (4-Pairs) of solid vacant copper with high-density polyethylene (HDPE) insulation and a CMP rated Jacket (fire-resistant).
You will find a variety of products offered at incredible prices. iTech is a wholesaler and a retailer of custom cables and accessories for networking. Our mission is to simplify connectivity through innovative products. Founded in 2012 as iTech having products with superior quality, value, innovation and customized cables for network installers. Components and the latest technologies to maximize cable performance and ensure compliance with industry specifications for each cable and its designated application.
iTechCables concentrated on giving unique connectivity products and network solutions to our customers while Giving unparalleled service and value-added solutions. Our employees and their dedication to providing our customers with superior cable products and superior service to support those products are what sets iTech apart from the competition. Our organization is dedicated to going beyond basic accomplishment by creating trust where your specific needs are addressed through products.
iTech Offering a wide range of products – Network. Cat5e plenum BC & 550mhz cat6 blue plenum cable 1000ft bulk
, Cat6 plenum Bare copper HDMI, SVGA, DVI, wall plates cables. All cables are available in the high-quality range, you can be sure your investment is protected for the long run.